6158FZ--Anti-Yellowing Silicone Sealant for T8 Glass Tube Bonding

Availability: In stock

$0.00

Quick Overview

Product Description:


6158FZ is a thixotropic, micro sink type one-component organic silicone sealant for bonding and sealing which can cure at room temperature. It’s non-corrosive for most of the metals, having excellent resistance to cold and hot alternation, ageing resistance and electrical insulation. It is also moisture proof, shock proof, corona resistant, anti-creeping and ageing-resistance. It is a one-component dealcoholization-type silicone sealant which completely compliant with EU ROSH and REACH directive and widely used for bonding and sealing of LED lighting and Power Supply.

6158FZ--Anti-Yellowing Silicone Sealant for T8 Glass Tube Bonding

Availability: In stock

$0.00

Please feel free to contact us if you have any special requirements.

6158FZ--Anti-Yellowing Silicone Sealant for T8 Glass Tube Bonding

Product Description:

6158FZ is a thixotropic, micro sink type one-component organic silicone sealant for bonding and sealing which can cure at room temperature. It’s non-corrosive for most of the metals, having excellent resistance to cold and hot alternation, ageing resistance and electrical insulation. It is also moisture proof, shock proof, corona resistant, anti-creeping and ageing-resistance. It is a one-component dealcoholization-type silicone sealant which completely compliant with EU ROSH and REACH directive and widely used for bonding and sealing of LED lighting and Power Supply.


  • 6158FZ--Anti-Yellowing Silicone Sealant for T8 Glass Tube Bonding


Product Code: 6158FZ

 

Product Photo

 

 

Product Application:

  1. T8 T6 PCBA bonding and heat conduction, End Cap Bonding and sealing
  2. Sealing for fixing and insulation of electrical accessories
  3. Bonding and Sealing for Metal and Plastic parts of chargers
  4. Bonding and Sealing for Lights, small household appliance, electric circuit board, electronic parts and components, and switching power supply and machinery etc.

 

 

Product Technical Specification

Uncured

Item

Standard

Value

Appearance

Visual Inspection

White Cream

Relative Density

GB/T 533-2008

1.56

Surface Drying Time(min,25℃)

GB/T13477.5-2002

      2-15

Complete Curing Time(min,25℃)

Test at Operating Environment

24

Curing System

Test at Operating system

alcoholic type

 

 

Cured At Standard Conditions * for 7 Days

Item

Standard

Value

Hardness(Shore A)

GB/T 531.1-2008

60±5

Tensile Strength (MPa)

GB/T528-2009

≥1.7

Shearing Strength(MPa)

GB/T7124-2008

≥2.08

Elongation Break (%)

GB/T 528-2009

>110

Peeling Strength(MPa)

GB/T7124-2008

>30

UsableTemperatureRange(℃)

Test at Operating Environment

-50~250

Volume Resistively (Ω·cm)

GB/T 1692-2008

5×1014

Dielectric Strength(kV/·mm)

GB/T 1695-2005

≥18

Dielectric Constant(106Hz≤)

GB/T1693-2007

2.9

Thermal conductivity[W(m·K)]

GB/T 5598-1985

≥0.7

 

 

Application Craft and Notice:

  1. Before coating, should clean the rust, oil dirt and wipe dry of the object surface.
  2. Peel off the tube hat, squeeze the sealant onto the object surface after cleaned, make sure its evenly distributed, and the object coating surface fold together well.
  3. Put the fold or sealed part in the air for self curing. The curing process is from surface to deep inside, within 24hours (at room temperature25°Cand relative humidity 55%), the sealant will cure a thickness of 2-4mm. If the target depth is far inside, especially for area that not easy to contact with air, it will need longer time to complete cured. Also if low in temperature, the curing time will need more. SO before move the parts to next step for packing or assembly we suggest to wait a enough long time.

 

Application Notice

Screw up the tube hat if there still unspent gel, sealed it for storage. For second use, if there is a little crust at the seal, remove it and it will not affect normal use. During storage of the gel, there could be small curing at the tube entrance, just clean it before use.

 

Package Transportation and Self Life

Packing: 300ML per tube, 25tubes per carton

Transportation and Storage: By Air or By Sea via forwarder having the Chemicals Transportation License; Storage at25℃Room Temperature.

Shelf Life: 6 months

 

Product Certification:

UL,ROHS,REACH

 




6158FZ--Anti-Yellowing Silicone Sealant for T8 Glass Tube Bonding


Write Your Own Review

You're reviewing: 6158FZ--Anti-Yellowing Silicone Sealant for T8 Glass Tube Bonding

How do you rate this product? *

 Rate
Price
Value
Quality